
DualStage MF 10-P Pre-filter combined with MF membrane insert The DualStage MF 10-P combines particle filtration and micro-filtration in a single 10ʺ cartride making it ideal for water with high particl loading which needs to be microbiologically safe. Bacterial retention: > 99.99999% (> log 7) Polypropylene pre-filteration No impact on chlorineresidual Fits standard 10 inch housing DualStage MF 10-P The DualStage MF 10-P filter consists of a 9 ¾ʺ high quality 1 μm polypropylene thermal bonded prefilter and a PW^® MF membrane cartridge at its core. Water flows from the outside through the polypropylene pre-filter and exits through the membranes. The DualStge MF 10-P is particularly suite to situations with a high particle load in the water, where removal of dissolved substances like chlorine is not required. Technical specificatons Membrane type: PW^® MF, asymmetric hydrophilic capillary membranes Membrane material: PES Max. pore size: 0,20 μm absolute Bacterial retention: > 99.99999% (> log 7) ASTM F838-05 Cartridge size: 62 x 248 mm (OD x Length) Weight: 260 g Max. pressure: 5 bar (75 psi) Max. temp: 40°C (104°F) Flow rate: 8 L/min @ 2 bar Service life: +/- 3.000 L Material: Prefilter: polypropylene End-caps: ABS Filter tube: HIPS Potting: 2K epoxy resin Item no: 501226 Membrane cartridge tested for integrity according to ASTM D6908-06. ** Service life depends on local water conditions, the amount of micro particles (SDI) and level of prefiltration. SDI measured according to ASTM D4189-95. European guidelines prescribe exchange of cartridge after 6 months.

DualStage MF 10-P

Pre-filter combined with MF membrane insert

The DualStage MF 10-P combines particle filtration and micro-filtration in a single 10ʺ cartride making it ideal for water with high particl loading which needs to be microbiologically safe.

Bacterial retention: > 99.99999% (> log 7)
Polypropylene pre-filteration
No impact on chlorineresidual
Fits standard 10 inch housing

DualStage MF 10-P

The DualStage MF 10-P filter consists of a 9 ¾ʺ high quality 1 μm polypropylene thermal bonded prefilter and a PW^® MF membrane cartridge at its core. Water flows from the outside through the polypropylene pre-filter and exits through the membranes. The DualStge MF 10-P is particularly suite to situations with a high particle load in the water, where removal of dissolved substances like chlorine is not required.

Technical specificatons

Membrane type: PW^® MF, asymmetric hydrophilic capillary membranes
Membrane material: PES
Max. pore size*: 0,20 μm absolute
Bacterial retention: > 99.99999% (> log 7) ASTM F838-05
Cartridge size: 62 x 248 mm (OD x Length)
Weight: 260 g Max. pressure: 5 bar (75 psi)
Max. temp: 40°C (104°F)
Flow rate: 8 L/min @ 2 bar
Service life**: +/- 3.000 L
Material: Prefilter: polypropylene
- End-caps: ABS
- Filter tube: HIPS
- Potting: 2K epoxy resin
Item no: 501226

* Membrane cartridge tested for integrity according to ASTM D6908-06. ** Service life depends on local water conditions, the amount of micro particles (SDI) and level of prefiltration. SDI measured according to ASTM D4189-95. European guidelines prescribe exchange of cartridge after 6 months.