Baclyser® IL3, IL5, IL10

Inline hollow-fibre membrane filter for water hygiene in medical facilities

Preventing bacterial nosocominal infectious diseases caused by Pseudomonas aeruginosa, Legionella pneumophila, Stenotrophomonas maltophilia or Staphylococcus aureus among immunosuppressed and immunocompromised patients.

  • Effective protection against waterborne bacteria through sterile filtration
  • High flow rate 
  • Flow volume of 3,000, 13,000 or 56,000 litres (guide value) 
  • Standard connection: G½ʺ screw thread, optional 8 mm push-fit quick-release coupling as accessories
  • Suitable for medical appliances

Baclyser® IL

The Baclyser® IL filters are for inline installation in cold water supplies. The Baclyser® IL features a hollow-fibre membrane for microfiltration resulting in a 7-Log reduction of Brevundimonas diminuta. Thus, all waterborne bacteria such as pseudomonas and legionella are blocked. This complies with the FDA definition of sterile filtrated water. Filtration does not alter the chemical composition of water.

The Baclyser® IL range is designed to suit the customer needs. Baclyser® IL3/IL5 suits installations where space is at a premium. Baclyser® IL5/IL10 deliver high flow rates. The flow volumes shown in the technical data are for guidance only. The particular filters operating time is dependent on the flow volume and water quality.

The connection options of  G½ʺ screw thread and 8 mm push-fit offer ease of installation and changeability. The used filter should be disposed of responsibly.

Technical data

  • Size: L 118 mm x Ø 47 mm (Baclyser® IL3); L 150 mm x Ø 60 mm (Baclyser® IL5); L 210 mm x Ø 68 mm (Baclyser® IL10)
  • Flow volume (as a guide value)*: 3,000 Liter,; 13,000 Liter; 56,000 Liter
  • Fow volume*: 13 l/m (initial, at 5 bar, 20°C); 22 l/m (initial, at 5 bar, 20°C); 30 l/m (initial, at 5 bar, 20°C)
  • Bacteria retention: 7 log steps B. diminuta
  • Pore size: 0,2 μm (microfiltration)
  • Chlorine resistance**: ≤ 10 ppm
  • Max. operating pressure: 5 bar
  • Operating temperature***: ≤ 40°C
  • Connection: G½ʺ screw thread AG (Variant S)
  • Accessories: Push-in-quick-release coupling Ø 8 mm (Variant P)

* Guide value recorded at a flow rate of 6 l/min. and mains water quality at 5 bar; user-specific water quality, pressure conditions and the requisite flow rate have an influence on the flow volume and filter operating time.
** Continuous dosage of ≤ 10 ppm over operating time; short-term (1h) high dosage (400,000 ppm h) for chemical disinfection.
*** Application with higher temperatures only after consultation with Aqua free.

Baclyser® IL3, IL5, IL10

Inline hollow-fibre membrane filter for water hygiene in medical facilities

Preventing bacterial nosocominal infectious diseases caused by Pseudomonas aeruginosa, Legionella pneumophila, Stenotrophomonas maltophilia or Staphylococcus aureus among immunosuppressed and immunocompromised patients.

  • Effective protection against waterborne bacteria through sterile filtration
  • High flow rate 
  • Flow volume of 3,000, 13,000 or 56,000 litres (guide value) 
  • Standard connection: G½ʺ screw thread, optional 8 mm push-fit quick-release coupling as accessories
  • Suitable for medical appliances

Baclyser® IL

The Baclyser® IL filters are for inline installation in cold water supplies. The Baclyser® IL features a hollow-fibre membrane for microfiltration resulting in a 7-Log reduction of Brevundimonas diminuta. Thus, all waterborne bacteria such as pseudomonas and legionella are blocked. This complies with the FDA definition of sterile filtrated water. Filtration does not alter the chemical composition of water.

The Baclyser® IL range is designed to suit the customer needs. Baclyser® IL3/IL5 suits installations where space is at a premium. Baclyser® IL5/IL10 deliver high flow rates. The flow volumes shown in the technical data are for guidance only. The particular filters operating time is dependent on the flow volume and water quality.

The connection options of  G½ʺ screw thread and 8 mm push-fit offer ease of installation and changeability. The used filter should be disposed of responsibly.

Technical data

  • Size: L 118 mm x Ø 47 mm (Baclyser® IL3); L 150 mm x Ø 60 mm (Baclyser® IL5); L 210 mm x Ø 68 mm (Baclyser® IL10)
  • Flow volume (as a guide value)*: 3,000 Liter,; 13,000 Liter; 56,000 Liter
  • Fow volume*: 13 l/m (initial, at 5 bar, 20°C); 22 l/m (initial, at 5 bar, 20°C); 30 l/m (initial, at 5 bar, 20°C)
  • Bacteria retention: 7 log steps B. diminuta
  • Pore size: 0,2 μm (microfiltration)
  • Chlorine resistance**: ≤ 10 ppm
  • Max. operating pressure: 5 bar
  • Operating temperature***: ≤ 40°C
  • Connection: G½ʺ screw thread AG (Variant S)
  • Accessories: Push-in-quick-release coupling Ø 8 mm (Variant P)

* Guide value recorded at a flow rate of 6 l/min. and mains water quality at 5 bar; user-specific water quality, pressure conditions and the requisite flow rate have an influence on the flow volume and filter operating time.
** Continuous dosage of ≤ 10 ppm over operating time; short-term (1h) high dosage (400,000 ppm h) for chemical disinfection.
*** Application with higher temperatures only after consultation with Aqua free.

Baclyser IL-DATA-GB-05/2021-V003 | © aqua-free.com