Baclyser® TL (2M) / Baclyser® TR (2M)

Point-of-use hollow fibre membrane filter for water taps

  • Safe protection against waterborne bacteria
  • CE-marked medical device
  • Operating time of up to 2 months
  • Hygienic design to avoid retrograde contamination
  • Narrow construction depth (51 mm – TL version)
  • Offset outlet for more flexibility 

The Baclyser® tap filters: TL with laminar outlet and TR with shower rose outlet are CE-marked medical devices. These are disposable, point-of-use, hollow fibre membrane water filters with a proven retention efficiency of 7 Log steps for Brevundimonas diminuta. This complies with the FDA definition of sterile filtered water. Thus, all waterborne bacteria such as pseudomonas and legionella are blocked by these tap filters. The hygienic design and use of bacteriostatic material in the filter outlet prevents retrograde contamination. The filter is designed to deliver a consistent bacteriological performance at the design flow rate for the up to 2-months dependent on water quality. On expiry of the operating time, the used filter can be easily changed via the quick release coupling and then disposed of responsibly. The individual barcode on each filter supports traceability and documentation processes within hospitals hygiene routines.

  • Size: L 105 mm, Ø 44 mm
  • H 51 mm (Baclyser® TL version)
  • H 60 mm (Baclyser® TR version)
  • Bacteria retention: 7 log steps, Brev. diminuta
  • Pore size: 0.2 μm
  • Operating time*: max. 2 months (62 days)
  • Chlorine resistance**: ≤ 10 ppm
  • Flow rate: 10 l/min (at 5 bar, at 30 °C)
  • Max. operating pressure***: 5 bar
  • Max. operating temperature: 60°C (70 °C ≤ 30 min. over the operating time)
  • Connection: Quick-release coupling
  • Certification: WRAS

The tap filter is also available as a gamma sterilized product Baclyser® TL (2M) sterile or Baclyser® TR (2M) sterile.

* Depending on the water quality.
** Continuous dosage of ≤ 10 ppm over operating time; short-term (1 h) high dosage (400,000 ppm) for chemical disinfection.
*** Not suitable for connection to low-pressure systems (e.g. boilers).

Baclyser® TL

Baclyser® TR

Water supply systems are a major source of nosocomial infections. Point-of-use membrane filters – installed directly at the water outlet – are an established method of protecting patients against waterborne bacteria. In medical facilities, point-of-use bacterial filters are used either reactively, as an immediate solution in the event of contamination with pathogens such as Legionella or pseudomonas or proactively, to deliver consistent protection to high risk patients from the ever present risk of infection.

Health Technical Memorandum (HTM04-01) highlights the use of point-of-use filters as an acceptable control measure in healthcare environments. Part B: Operational Management indicates that, in high risk areas such as haematology, oncology, neurosurgery, transplant units or accommodation for older people, point-of-use filters should be considered in the event of any positive Legionella or Pseudomonas sample results.

Product overview

Related products:

Product line: HygieneSiphon hygienic waste trap in different sizes

HygieneSiphon

HygieneSiphon for hospitals and nursing

Using the Baclyser S (2M) medical filter for showers

Baclyser® S (2M)

Point-of-use hollow fibre membrane filter for showers